Request A Quote
Company Profile Facilities Manufacturing Capabilities
 
 
   
 

Employment Opportunities in Plymouth, Michigan

Die Setter 2nd Shift

Essential Duties and Responsibilities:

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individual with disabilities to perform the essential job functions. Also, additional job duties may be assigned.

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individual with disabilities to perform the essential job functions. Also, additional job duties may be assigned.

• To safely perform die set of progressive and transfer metal stamping presses

• Sets up dies from start to finish so they are production ready

• Die setting functions: responsible for a Quick Die Change overs, First/Last piece approval, proper use and set up of load guard (tonnage monitor); PLC system (programming, sensor verification)

• Possess mechanical aptitude required for assisting in tool replacements

• Blue print reading

• Responsible to perform quality checks using measuring equipment such as calipers, gauges and others

• Loading and unloading coils of steel and dies to the press

• Operation of forklift and overhead crane

• Troubleshooting problems

• Decide course of action to improve parts and productivity

Die Setting Skills:

• Q.D.C. Leader Q.D.C.

• Tool room system training

• Grinding skills

• Die maintenance skills

Understanding Press System:

• Proper use and operation of tonnage monitors

• Proper use and operation of P.L.C.'s

• Proper use and adjustment of Die Protection Devices

• Limit Switches

• Sensors

Understanding of Press Line Components:

• The press, slide, clutch, and counter balances

• The Feeder: strengtheners, pilot pin, grippers and air valves

• The Coil Box: Pinch rollers, chain drive and control box

• Conveyor system set-up

Safety Program:

• Proper use and instruction of Power Lockout procedure

• Light curtain setup, calibration and adjustment

• Barrier guard adjustment

• Proper use and instruction of Dual (Two Hand) Control Procedure

• Proper use of the Die Setters Safety Setup Check Off List

Documentation:

• Setup time

• Equipment Maintenance Check List

• Plex

• Production paperwork

• Die Summary

• Q.D.C. Paperwork

Die Operation:

• Tune in a proper starting procedure for job.

• Knowledge of using Setup stop blocks to set shut heights

• Have the ability to set tooling heights and clearances.

• Properly adjust and set progression, feeder heights, air pressure and that all controls are set for that job.

Intangible Skills:

• To be able to communicate with the tool room on repairs and improvements needed on the dies

• Knowledge of the tool crib procedures and perishable tooling

• Have the ability to train others

• Exhibit leadership abilities.

• Take the initiative, "Be that go to person" for those in your room or on your shift.

• Have the ability to recognize when tool room assistance is needed

• Be a highly motivated person

Quality:

• Poka Yoke

• Advanced metrology (Optical Comparator, Height Gages, etc.)

• Blueprint Reading

• G. D. & T.

Education/Experience/Certifications:

To effectively carry out duties and responsibilities in the job position the following education, experience, or certifications are preferred:

Education:

• High School Diploma or GED

Experience:

• Automated press background with minimum two to three years of related experience and or training.

• Welding, laser cutting, plasma cutting background also a plus.

Benefits

E & E offers a competitive wage, solid opportunity, and a career path to success. We offer comprehensive benefits such as medical, dental, vision, life insurance, short-term and long-term disability, 401 (k) program, and free membership to local gym.

PLY

Electrician

Essential Duties and Responsibilities:

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individual with disabilities to perform the essential job functions. Also, additional job duties may be assigned.

• Troubleshoots and repairs mechanical, hydraulic, pneumatic and electrical/electronic equipment including but not limited to programmable controls, numeral controls, power supplies, drives, gages and test equipment.

• Plans and performs work requiring a thorough knowledge of electrical/electronic and mechanical theories and principles, writing specifications, local and national electrical codes, properties of various materials, and principles of operation and application of electronic equipment.

• Installs, starts up and shuts down equipment in accordance with company safety procedures for machine activation and shutdown and in line with OSHA requirements.

• Advises operators and line mechanics of operation procedures and requirements for working safely with electrical/electronic and mechanical equipment and components.

• Informs appropriate management and line mechanics of potential electrical/mechanical problems and inherent dangers involved.

• Maintains company-required performance and maintenance records for identified equipment.

• Performs preventive maintenance functions as directed.

• Assists maintenance personnel with technical troubleshooting.

• Assists and trains other maintenance and/or other technical level employees.

Education/Experience/Certifications:

To effectively carry out duties and responsibilities in the job position the following education, experience, or certifications are preferred:

Education:

• High School Diploma or GED

• Two-year technical degree or accredited apprenticeship program or the equivalent in a technical field is required.

Experience:

• 3-5 years of proven experience in the electrical/electronics, mechanical, hydraulic and pneumatic fields are required and the ability to demonstrate high proficiency in these areas.

• Experience and ability to work in a fast-paced manufacturing environment.

• A thorough knowledge of electrical/ electronic components and equipment including the use of special instruments for diagnostic purposes.

Certifications:

• Journeyman, or State Certification

Benefits

E & E offers a competitive wage, solid opportunity, and a career path to success. We offer comprehensive benefits such as medical, dental, vision, life insurance, short-term and long-term disability, 401 (k) program, and free membership to local gym.

PLY

Fabricator Technician

A Fabricator Technician is responsible for all fabrications and the use of all equipment needed to produce such fabrications. A Fabricator must be motivated, a self-starter, and willing to work with others in a team environment.

To be a successful Fabricator, an individual must be able to perform each of the essential duties below which are representative of the knowledge, skill, and/or ability required. Additional job duties may be assigned. Reasonable accommodations may be made to enable an individual with disabilities to perform the essential functions of a Fabricator.

•Develop welding projects by analyzing existing equipment, work orders, prints, drawings, or verbal directions.

•Calculate material requirements and create bill of material

•Responsible for maintaining stock levels

•Fabricate components by using equipment to clean, prepare, cut, burn, and weld according to the proper method.

•Maintain project time lines utilizing multi-tasking skills/project management

•Maintain documentation on all projects including expected and actual completion dates

•Maintain safe working environment by following procedures and complying with all legal regulations

•Update job knowledge by participating in educational opportunities

The physical demands describes below are representative of those that must be met by an employee to successfully perform the essential functions of a Fabricator. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The following physical demands include:

•Standing

•Walking

•Use hands to finger, handle or feel

•Reach with hands and arms

•Climb or balance

•Kneel or crouch

•Weight up to 50 Pounds

Material Handler

Essential Duties and Responsibilities:

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individual with disabilities to perform the essential job functions. Also, additional job duties may be assigned.

• Unload trucks delivering raw material using 23 000 ibs industrial fork lift.

• Ability to safely operate over head crane ranging from 10-40 ton.

• Measure steel to determine width and thickness.

• Identify job the raw material is used in.

• Document job number on raw material.

• Log received material in MRP system (Plex).

• Place raw material in warehouse and group similar raw material together.

• Maintain all re-weights of material returned form production.

• Pull & pre-stage raw material using industrial fork lift.

• Participate in raw material inventory audit by weighing raw material.

• Place scrapped raw material in container for delivery to scrap dealer.

• Support press operators by replacing full tubs with empty tubs.

• Support press operators by replacing slug tubs.

• Performing an initial walk-around of your forklift to ensure that it is in good working order before operating it, and reporting any problems or irregularities to maintenance.

• Training of new employees that apply to material handling responsibilities.

• Must have the ability to balance multiple tasks and priorities.

• Must be able to operate forklift and overhead crane taking into consideration human traffic.

• Must be able to work over-time as required.

• Ability to communicate well and work with others.

Education/Experience/Certifications:

To effectively carry out duties and responsibilities in the job position the following education, experience, or certifications are preferred:

Education:

• High School Diploma or GED

Experience:

• One or more years of experience in the industry

• Hands on experience

Certifications:

• Preferably Hi-Lo and Overhead crane License. Needs to have valid Michigan Driver License.

Benefits

E & E offers a competitive wage, solid opportunity, and a career path to success. We offer comprehensive benefits such as medical, dental, vision, life insurance, short-term and long-term disability, 401 (k) program, and free membership to local gym.

PLY

Quality Tech

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individual with disabilities to perform the essential job functions. Also, additional job duties may be assigned.

-Dimensional evaluation of production parts, first/last piece approvals, and audits as required by the quality system.

-Work with production associates to assure the proper usage of measurement instruments on the production floor.

-Work with production associates to assure the proper usage of inspection instructions on the production floor.

-Assist in the design and development of new quality systems.

-Perform special quality studies.

-Assist in problem solving of quality issues at customer facilities as needed.

-Prepare reports for customer review as needed.

-Provide feedback on dimensional concerns to toolroom, engineering, and manufacturing.

-Maintain a clean and organized work environment at all times.

Employees are expected to follow all standards listed below:

-Consistently exhibit appropriate attendance habits, working the hours necessary to perform the job.

-Organize and maintain efficiency of personal work area.

-Provide necessary, accurate, and timely feedback of all pertinent information to co-workers and management.

-Effectively communicate with co-workers and management personnel to enhance teamwork and communication initiatives.

-Consistently adhere to and support company policies and procedures, including ISO14001, TS16949, and safety regulations.

-Accept instructions and duties in a positive manner.

-Treat all co-workers with dignity and respect.

-Actively support the E&E values (Safety, Fairness, Respect, Hard Work, and Long-Term Profitability).

E & E offers a competitive wage, solid opportunity, and a career path to success. We offer comprehensive benefits such as medical, dental, vision, life insurance, short-term and long-term disability, 401 (k) program, and free membership to local gym.

Tool & Die Repair - 2nd Shift

Essential Duties and Responsibilities:

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individual with disabilities to perform the essential job functions. Also, additional job duties may be assigned.

• Repair, maintenance, and troubleshooting of dies.

• Work as a team with the production department on all tooling issues.

• Study blueprints, sketches, models, or specifications to plan sequence of operations for fabricating tools, dies or assemblies.

• Use of measuring instruments to conform to specifications, such as; calipers, gauge blocks, micrometers, and dial indicators to verify dimensions, alignments and clearances of finished parts.

• Set up and operate lathes, milling machines, and bench grinders to cut, bore, grind and shape parts to specific dimensions.

• File, grind, shim, and adjust parts for proper fit.

• Experience working with large progressive, transfer and deep draw dies.

• Cut, Shape, and trim blanks or blocks to specified lengths or shapes using power and hand tools.

• Rework of damaged components in a timely manner.

• Capable of interacting with fellow team members in a professional manner.

• Troubleshoot problems to determine solutions.

• Maintain a clean and safe workplace.

Education/Experience/Certifications:

To effectively carry out duties and responsibilities in the job position the following education, experience, or certifications are preferred:

Education:

• High School Diploma or GED.

• Tooling apprenticeship or journeyman status highly preferred.

Experience:

• Minimum three years tool and die experience.

• Needs high strength steel knowledge and background.

Benefits

E & E offers a competitive wage, solid opportunity, and a career path to success. We offer comprehensive benefits such as medical, dental, vision, life insurance, short-term and long-term disability, 401 (k) program, and free membership to local gym.

Transfer Press Operator 2nd Shift

Essential Duties and Responsibilities:

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individual with disabilities to perform the essential job functions. Also, additional job duties may be assigned.

• Inspects and measures machined work pieces to verify conformances to specifications.

• Examines finished work pieces to verify conformance with specifications according to operator inspection sheet, quality control plans and/or customer notes using instruments such as gauges.

• Maintains the work area and equipment in a clean and orderly condition and follows prescribed safety regulations.

• Ensure compliance with corporate and plant safety standards.

• Basic understanding of computers and ability to perform computer functions as they pertain to the job.

• Ability to read and interpret documents such as blueprints, welding symbols, operating and maintenance instructions and procedure manuals.

• Demonstrated detail orientation, self-motivation skills and ability to multi-task.

• Competent at basic dimensional measuring and able to quickly learn the use of precision measurement tools.

• Demonstrated ability to effectively implement or respond to change.

• Working safely as a condition of employment.

Education/Experience/Certifications:

To effectively carry out duties and responsibilities in the job position the following education, experience, or certifications are preferred:

Education:

• High School Diploma or GED

Experience:

• One to five years of related Transfer Press experience and or training.

• Welding, Laser Cutting, Plasma Cutting, and or Water Jet Cutting background also a plus.

Benefits

E & E offers a competitive wage, solid opportunity, and a career path to success. We offer comprehensive benefits such as medical, dental, vision, life insurance, short-term and long-term disability, 401 (k) program, and free membership to local gym.

PLY

Weld Tech

Essential Duties and Responsibilities:

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individual with disabilities to perform the essential job functions. Also, additional job duties may be assigned.

• Provide technical support in developing ad improving welding processes

• Set up of robotic and resistance weld operations, and Poke-yoke apparatus

• Troubleshoot part fit-up problems

• Provide general weld support to operators

• Knowledge of robot programming and general welding maintenance (Fanuc, Panasonic)

• Controls knowledge (Allen-Bradley, SLC 500 and SLC 5000 family of controls and HMI)

• Provide support in the analysis and resolution of weld equipment failures

Education/Experience/Certifications:

To effectively carry out duties and responsibilities in the job position the following education, experience, or certifications are preferred:

Education:

• High School Diploma or GED

Experience:

• Three-Five years as a weld technician in a manufacturing environment.

Certifications:

• 2 year certificate in an electronic/electrician or robotic weld technical program or equivalent experience

Benefits

E & E offers a competitive wage, solid opportunity, and a career path to success. We offer comprehensive benefits such as medical, dental, vision, life insurance, short-term and long-term disability, 401 (k) program, and free membership to local gym.

PLY

 
   
Terms & Conditions
  E&E Mfg Co., Inc. | 300/400 Industrial Drive, Plymouth, MI 48170 | 734-451-7600 | 734-207-1873 FAX
E&E Mfg of Tennessee, LLC | Athens, TN 37303 | 423-649-1700 | 423-649-1701 FAX